Grip-D adalah penjepit perbaikan tipe dua potong, dapat dipasang untuk keluar dari pipa in situ, tanpa perlu melepas dan menyampaikan pipa. This makes it the ideal solution for permanent repairs of pipe joints, cracks etc.
Cocok untuk pipa OD φ180-φ2032mm
The advantage of GRIP-D repair clamps is that is can befitted to existing pipes in situation, without any need to remove and replacing pipes, GRIP-R pipe repair clamp can repair the pipes that are ageing and corrosive and pipe wall has holes or cracks . When installing it, it only needs pipe clamp to wrap the leakage part and tighten the bolt. Then the installation is finished ideally and reliably.
Diameter luar dari pegangan-d ganda pipa perbaikan pipa adalah dari 180 hingga 2032mm.
Parameter Teknis Grip-D
| Jajaran penjepit | OD Produk | Lebar | Jarak antara slip penyegelan | Baut | ||||||||
| Od | Min-Max |  |  | Φ d | B | C | tanpa insert strip | dengan insert strip (maks) | ||||
| （Mm） | (Di dalam.) | （Mm） | (batang) | (batang) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (Nm) | M |
| 180 | 7.087 | 16 | 30 | 204 | 142 | 250 | 75 | 10 ～ 25 | 40 | 60 | M12 × 2 | |
| 200 | 7.874 | 198-202 | 16 | 30 | 224 | 142 | 250 | 75 | 10 ～ 25 | 40 | 60 | |
| 216-222 | 16 | 30 | 142 | 250 | 75 | 10 ～ 25 | 40 | 60 | ||||
| 250 | 9.843 | 16 | 25 | 282 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | ||
| 267 | 10.512 | 16 | 25 | 299 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | ||
| 273 | 16 | 25 | 305 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||
| 304 | 301-307 | 10 | 20 | 336 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | ||
| 320-327 | 10 | 20 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | ||||
| 352-359 | 8.5 | 16 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | ||||
| 377 | 14.843 | 375-379 | 8.5 | 16 | 409 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |
| 7.5 | 16 | 438 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | ||||
| 452-462 | 6.5 | 12 | 489 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||
| 508 | 20.000 | 503-513 | 6 | 10 | 540 | 142 | 250 | 75 | 10 ～ 25 | 40 | 120 | M16 × 2 |
| 22.000 | 554-564 | 5.5 | 10 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||
| 609.6 | 24.000 | 605-615 | 5 | 10 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | ||
| 711.2 | 28.000 | 4 | 5 | 743.2 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | ||
| 762 | 30.000 | 4 | 5 | 794 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | ||
| 32.000 | 809-817 | 4 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||
| 910-918 | 4 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | ||||
| 1016 | 40.000 | 1012-1020 | 4 | 5 | 1048 | 142 | 250 | 75 | 10 ～ 25 | 40 | 200 | |
| 1117.6 | 44.000 | 3.5 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 200 | |||
| 1219.2 | 3.5 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 200 | ||||
| 1320.8 | 52.000 | 1316-1325 | 3 | 5 | 1352.8 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |
| 1422.4 | 1418-1427 | 3 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |||
| 1524 | 1519-1529 | 2.5 | 5 | 1556 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
| 64.000 | 1621-1631 | 2.5 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |||
| 2.5 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |||||
| 1828.8 | 1824-1834 | 2 | 5 | 1860.8 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
| 1930.4 | 76.000 | 2 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |||
| 2032 | 80.000 | 2027-2037 | 2 | 5 | 2064 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |
| Bahan / Komponen | V1 | V2 | V3 | V4 | V5 | V6 |
| Selubung | AISI 304 | AISI 316L | AISI 316L | AISI 316TI | AISI 304 | |
| Baut | AISI 304 | AISI 316L | AISI 304 | AISI 304 | AISI 4135 | |
| Bar | AISI 304 | AISI 316L | AISI 304 | AISI 304 | AISI 4135 | |
| Insert strip (opsional) | AISI 301 | AISI 301 | AISI 301 | AISI 301 | AISI 301 |
Bahan paking karet
| Media | Kisaran suhu | |
| NBR | Air, gas, minyak, bahan bakar dan hidrosibon lainnya | -30 ℃ Hingga+120 ℃ |
| MVQ | ||
| FPM/FKM |